Weight Calculator

This weight calculator gives the weight and volume of a part or a raw material blank shaped as a cylinder (round bar, shaft, pin, billet), a sphere (ball) or a box (plate, block, flat bar). Choose the shape, enter its dimensions in millimeters and select the material: the calculator multiplies the volume by the material density.

It is useful to estimate the raw material cost of mold and die components, the weight of mold plates and inserts for handling and lifting, the shipping weight of tools, and the shot weight of simple castings.

How to use this calculator

  • Shape :

    Select Cylinder for round bars, shafts and pins, Sphere for balls, or Box for plates, blocks and flat bars. Only the dimensions of the selected shape are asked.

  • Dimensions :

    Cylinder: diameter (D) and length (L). Sphere: diameter (D). Box: length (L), width (W) and height (H). All dimensions are in millimeters (mm).

  • Material :

    Select the material; its density (a typical value at room temperature) is shown in the list and with the result.

The result is the weight of the solid shape. Holes, pockets and chamfers are not deducted, and the density of an alloy can differ slightly from the typical value used here: for exact weights use the density from your material certificate.

Select the part shape
Diameter in mm
Length in mm
Width in mm
Height (thickness) in mm
Select the material